| Ventura PowerLED | |
| The Ventura PowerLED recessed spot is Imtra’s latest (and most powerful) PowerLED spot. Ventura’s lumen output matches or exceeds 20W halogen spots of similar size. Like all Imtra PowerLED spots & fixtures, the Ventura is 100% dimmable when used with Imtra's power-saving PWM momentary digital dimmer. Ventura's ultra thin bezel profile blends in nicely with hard or soft headliners. Like our other IML PowerLED spots, Ventura’s smooth aperture appearance without “hot spots” sets it apart from other LED spots on the market. Available in several finishes with choice of warm or cool LED output. Ventura conveniently & firmly installs with self adjusting trap springs. |  |
Hatteras PowerLED | |
The Hatteras PowerLED is a high flux LED spot with wide-flood light beam characteristics and ultra slim trim ring profile, making it ideal for low to medium ceiling heights or efficient under-cabinet lighting. Its shallow housing allows placement within ceilings that have limited air space behind. The Hatteras PowerLED is also completely sealed and is a popular choice for exterior mounting in FRP hard-tops for nighttime cockpit and helm illumination. A built-in dimmer interface allows for effortless touch-control dimming using our IML PWM Dimmer.
|  |
| Portland PowerLED | |
The Portland PowerLED recessed spot uses Cree and Nichia high flux LEDs with optimized wide angle reflectors delivering uniform light output across the entire lens surface area resembling a halogen-based fixture. Power consumption is less than 3 watts. It is completely sealed, recesses in less than an inch of space, and uses screws for mounting; ideal for hard grp ceilings such as hard tops or shower stalls. Available in all LED colors. Several trim ring finishes available.
|  |
| Avalon 105 PowerLED | |
The Avalon 105 PowerLED recessed ceiling light is a mid-sized fixture incorporating our latest duo-chip
technology to deliver exceptionally high lumen output. Its custom designed reflector and frosted lens
combine for a smooth aperture appearance resulting in a symmetric and wide beam light pattern without
the distracting striations that are common with traditional halogen and incandescent lighting. |  |
| Kodiak | |
This low-profile recessed courtesy light is supplied with a double o-ring seal and a form-fit trim ring/lens assembly which stays secure even in the worst conditions. The double-molded hermetically sealed LED sub-assembly is impervious to water ingress resulting in a truly maintenance-free courtesy light. Miniscule power-consumption. Mounts using screw fasteners. Several finishes available.
| 
|
| Sydney | |
Pivoting LED reading light uses current-stable drive electronics with a single 3.0 watt Luxeon-K2 warm-white high-flux LED and optimized reflector delivering bright light output for comfortable reading. Mounts easily using two screw fasteners. Available in Chrome or Satin Nickel finish.
|  |