G4 Standard
A low-cost bulb that works with any fixture requiring a G4 bulb. It is available in 12V, 14V, 24V, 28V or 32VDC versions with standard outputs from 5 to 20 watts.
G4 Xenon
Lasts up to five times longer than standard G4 bulb, with only slight reduction in light output. Xenon bulbs tend to be more resistant to voltage fluctuations and offer more flexible handling characteristics.
GU5.3-MR16 Reflector Lamps
Our MR16 Reflector Lamps have a pressed glass reflector inside. The "MR" actually stands for "multi-faceted reflector." The interior or reflecting side of the bulb is comprised of facets and covered with an aluminum coating. Our MR16s are available in either a 24 degree or 38 degree beam angle. Unlike MR16 dichroic lamps, our aluminum reflector lamps reflect both heat and light out through the front where it can dissipate into the circulating air. Some of our bulbs have a special cover glass located near the front end of the reflector. This cover provides extra safety for the user in case the bulb breaks. In some cases, it is preferred to use an MR16 without the front glass and these are designated with "NL" at the end of their part number.
GU-10 Aluminum Reflector Lamps
Line voltage GU-10 aluminum reflector bulb is used in many of today's line-voltage spots. They are designed to reflect heat out through the front of the fixture, making them a good choice for fixtures installed in tight spaces.
R7S Double-Ended
High-intensity linear halogen bulb. Typically used for flood light applications. 120/220VAC available.
