|
IML PowerLED PWM Dimmer
Low current PWM (Pulse Width Modulation) electronic dimmer designed to work with all Imtra PowerLED spots and fixtures. Will operate with DC or 60Hz low-voltage AC from inductive compatible transformer such as Imtra's Tector Toroidal Transformers. Also compatible with Imtra's Voltage-Regulated LED Converters. Most electronic AC transformers are not compatible.
|
|
|
Captiva PowerLED PWM Dimmer
A Low current PWM electronic dimmer designed to work with the Captiva PowerLED eyeball spot. It will drive up to 50 lights and supports an unlimited number of momentary switches.
|
|
|
Intervolt Switchmode Dimmer
Full featured high capacity digital dimmers suitable for filament lamps including incandescent, halogen and xenon. Effectively dims most low power LED fixtures that use 5mm or SMD LEDs (will not work with high flux LEDs with current regulated drivers). Stackable for unlimited power demand. May be controlled with multiple momentary switches. Also available in a version with two channels to control two separate lighting circuits from one campact device.
|
|
|
IML Rotary DC Dimmers
These energy-efficient easy to install rheostat style dimmers are available in a range of power options. For use with all filament lamps (incandescent, halogen, xenon) and suitable for most low power LED fixtures (will not work with high flux LEDs with current regulated drivers). They operate on all 12VDC and 24VDC systems. They incorporate a full positive "off" position eliminating the need for a separate on/off switch. The smallest model (our most popular) will handle loads from 0 through 10 amps. For higher capacity circuits, we offer a 20 amp and 30 amp model. All dimmers are supplied with black rotary dials. Other style dials are available on request.
|
|
|
IML Low Voltage AC/DC Versa Dimmers
These dimmers have the same features as the IML DC Electronic Dimmers but with an ability to operate on either 12/24VAC (from transformer) or 12/24VDC (from battery). In a straight Low Voltage AC system, simply wire this dimmer on the low voltage output side of your transformer to control your light fixtures. As an additional feature, when wired with a 12VAC or 24VAC relay, your Low Voltage AC dimmer will automatically switch over to a DC back-up if your AC power is shut down or lost. (No need to wire a separate DC grid). Not recommended for use with any type of LEDs. This dimmer is compatible with Imtra's magnetic toroidal transformers and will not work with our electronic transformers. Not recommended for use with LEDs as it will cause premature LED diode failure.
|
|
|
Yachtica DIM KP-X 10A Line Voltage Dimmer
Full-featured 110/220VAC digital momentary switchmode dimmer capable of supporting up to 4 separate 2.5A circuits or a single 10A circuit. Features stable linear dimming using unlimited numbers of momentary switches. Also capable of one-touch pre-set "scenarios". Memory function recalls previous light level setting. Fully integrated circuit protection. Illuminated LED input & output status. Made in Italy.
|
|
|
Resolux LED Dimmers
Resolux 570 master dimmer for use with the F-9 PowerLED Spots.
|
|
