|
Hatteras PowerLED
The Hatteras PowerLED is a high flux LED spot with wide-flood light beam characteristics and ultra slim trim ring profile, making it ideal for low to medium ceiling heights or efficient under-cabinet lighting. Its shallow housing allows placement within ceilings that have limited air space behind. The Hatteras PowerLED is also completely sealed and is a popular choice for exterior mounting in FRP hard-tops for nighttime cockpit and helm illumination. A built-in dimmer interface allows for effortless touch-control dimming using our IML PWM Dimmer.
|
|
|
Newport PowerLED
Combining the latest generation Luxeon LEDs with proprietary high performance drive electronics and high efficiency optics, Imtra introduces a high output LSA (LED Spotlight Assembly) specifically designed to satisfy the demands of the marine market. Performance is comparable to today's typical 20W halogen spots but with a fraction of the energy consumption (approx. 5W) and with no radiated heat! The Newport PowerLED will operate off 10-30VDC or AC or low voltage AC (magnetic transformer only). It will not interfere with any on-board electronics. A built-in dimmer interface allows for effortless touch-control dimming using our IML PWM Dimmer. Light color choices include warm white, cool white, red, and cyan. Trim rings available in several finishes.
|
|
|
Portland PowerLED
The Portland PowerLED recessed spot incorporates the latest in high-flux LED technology with a highly efficient matched optical system. The result is a spotlight resembling a traditional halogen based fixture with uniformity of light across the entire lens area, enhancing aesthetic appearance and eye comfort. The housing of the Portland PowerLED is purpose-built and incorporates a highly efficient anodized aluminum heat sink which keeps the circuit board and LED within a temperature range that assures maximum product life. A built-in dimmer interface allows for effortless touch-control dimming using our IML PWM Dimmer.
|
|
|
Portland PowerLED (Generation 1)
Our first generation Portland PowerLED spots feature all the same benefits of the current Portland PowerLED except that these lights are NOT DIMMABLE. They are on sale only while supplies last!
|
|
|
Norfolk PowerLED
The latest in a series of high performance marine-grade, low voltage high-flux LED Spots delivering halogen-like quality with the power saving benefit of LEDs. A built-in dimmer interface allows for effortless touch-control dimming using our IML PWM Dimmer.
|
|
|
Norfolk PowerLED (Generation 1)
Our first generation Norfolk PowerLED spots feature all the same benefits of the current Norfolk PowerLED except that these lights are NOT DIMMABLE. They are on sale only while supplies last!
|
|
|
F-9 PowerLED Adjustable Spot
A beautifully crafted precision-made high-flux LED spot light with smooth action pivoting "eyeball" for light exactly where you want it. This spot has fully integrated drive electronics and uses the very latest Osram thin-film powerLEDs with optimized reflectors. Trim ring has a pleasing slightly beveled profile. Multi-voltage 10-30VDC. Made in Germany.
|
|
|
F-9 TouchLED
A touch-activated, fully dimmable recessed (adjustable beam) LED spot. Available in 12V or 24V DC.
|
|
|
F-7 PowerLED
The low-profile F7 PowerLED is a flush-mount down-spot requiring less than 5/8" ceiling depth and features a traditional round bezel design.
|
|
|
F-6 Spot with Cool White LED
12V or 24VDC versions, 18 x 5mm LED, Cool White LED, 2W Power Consumption, UV stabilized plastic housing, IP67 water-resistant, plastic or metal snap-on trim ring in several finishes.
|
|
|
F-6 Spot with Cool White LED and Nightlight Option
12V or 24VDC versions, 18 x 5mm LED, 2W Power Consumption, UV -stabilized plastic housing, IP67 water-resistant, plastic or metal snap-on trim ring in several finishes. 17 x Cool White LED with 1 x Blue or Red LED Nightlight Option.
|
|
|
F-6 Spot with Warm White LED
12V or 24VDC versions, 18 x 5mm LED, 2W Power Consumption, UV -stabilized plastic housing, IP67 water-resistant, plastic or metal snap-on trim ring in several finishes, Warm White LED
|
|
|
F-6 Spot with Warm White LED and Nightlight Option
12V or 24VDC versions, 18 x 5mm LED, 2W Power Consumption, UV -stabilized plastic housing, IP67 water-resistant, plastic or metal snap-on trim ring in several finishes, 17 x Warm White LED with 1 x Red or Blue LED Nightlight Option.
|
|
