X

SLEIPNER VECTOR FIN & STABILIZER SYSTEMS

 

FINS     |     ACTUATORS     |     CONTROLS

 

WHAT ARE SLEIPNER STABILIZERS?

Sleipner (Side-Power’s) Vector Fin Stabilizer system is a unique solution to an old problem: Seasickness. With Sleipner stabilizers, you can virtually eliminate that awful feeling of being seasick, whether underway or at anchor. Fin stabilizers is the only system that provides effective stabilization both at anchor and while cruising at planing speeds, and Side-Power stabilizers are about 30% more effective than all others. The curved shape of the Vector fins provides a more effective, more efficient method of stabilizing your boat at any speed, from at anchor or station-holding, to underway at speeds up to 43 knots. They are approximately 50% more efficient than conventional flat fins, and unlike flat fins, the curved Sleipner fins create enough lift to offset drag, resulting in virtually no loss of speed unlike flat fins. Sleipner Vector fins are designed for vessels between 52 and 150 feet.

SHOP STABILIZERS

SLEIPNER (SIDE-POWER) STABILIZER SYSTEM REVIEW

  

Captain Richard Kennedy share his experience of the Side-Power Stabilizers retrofitted on a Palmer Johnson 120.

Sleipner's Electric Vector Fins™

Experience unparalleled comfort and performance with Sleipner's Electric Vector Fins™. Designed to revolutionize your boating experience, Sleipner’s cutting-edge technology offers:

Unmatched Reliability: Sleipner’s electric actuators use a revolutionary gear system for unprecedented reliability and energy efficiency.

Stability at sea. Comfort at anchor. Experience both. 

Unique shape

The fins' distinctive curved design creates lift while minimizing drag, allowing the fins to convert more of their energy into effective roll stabilization. The result is a smoother, more comfortable ride, with significantly less resistance through the water, leading to enhanced performance during cruising.

Quiet operation

The patented electric actuator isolates the moving, mechanical high-torque gears and motor from the boat reducing about 92% of structural born noise known to be a challenge for boat owners looking to stabilize their vessels overnight.

Fuel efficiency

Thanks to the lift generated by the fins, faster vessels benefit from improved fuel efficiency. On average, boats equipped with Vector Fins™ can experience up to a 12% reduction in fuel consumption, compared to a flat fin design, making them a cost-effective and environmentally friendly choice for long-term use.

Performance at anchor

Unlike many stabilizer systems, Vector Fins™ are equally effective at anchor. Their advanced design reduces boat roll by up to 50% even when the vessel is stationary, ensuring maximum comfort for passengers and crew, whether at rest or in motion.

Easy retrofit

The compact actuator design is cleverly engineered around a frameless torque motor and harmonic drive strain wave gear. Easier installation with flange and bolt-lock. 

 

 

Sleipner's Vector Fin™

One look at the revolutionary Vector Fin™ shows you that it’s different from conventional fin stabilizers. The shape directs anti-roll forces more efficiently. This means they can be smaller than conventional straight fins. This reduced size with the same power, hydrodynamically optimized fin profile, and lift induced by the shape helps reduce any drag caused by adding stabilizers. In most installations, we see no loss of speed or efficiency - in some, we have actually seen gains in both top speed and fuel economy. Vector Fins are available in 6 sizes to suit boats from about 52’ up to 150’. 2 and 4 fins systems available.

SHOP FINS

ACTUATORS

8 different actuators are available to suit fiberglass, aluminum, steel or wood hull construction.

  • The smallest size uses a rack-and-pinion style actuator which has no cylinder bearings to service and virtually no moving parts.
  • All actuators feature dual cylinders for equal, balanced power in both directions
  • All offer state-of-the-art bearings that offer virtually silent operation, which is great when the actuators are mounted in living quarters.
  • The service interval is typically 4,000 hours which is far less frequent than those of other manufacturers.
  • Side-Power actuators feature a low profile which typically fit into spaces others cannot.
SHOP ACTUATORS

    

POWER SYSTEMS

  • The stabilizers are powered via a self-contained AC powerpack with option for engine driven pump.
  • The powerpack can be integrated with hydraulic thruster, windlass, capstans or other functions, such as emergency bilge pump, deck wash, fire pump, etc.
  • Powerpacks are pre-wired and pre-plumbed for easy installation.
  • All components communicate via Sleipner's S-Link CANbus system
    • Installation is easier
    • Multiple control stations are easy to add
    • The stabilizers are linked to the thrusters
    • Warnings and alarms are communicated to all components
    • Software updates for all components are easily installed through a single portal
SHOP POWER SYSTEMS

 

SLEIPNER STABILIZER RESOURCES

KEY BUILDERS USING SLEIPNER VECTOR FIN & STABILIZER SYSTEM

About Us

IMTRA Corporation is a customer oriented company serving the North American marine and commercial industries with superior products and support. We strive to develop systems and services that exceed your needs as a customer and do so with honesty, integrity, and courtesy from within all areas of the company. 

 

 

Contact

 

Please contact IMTRA for answers to any questions you may have, technical advice, troubleshooting and more.
508.995.7000 Mon-Fri 8:30 a.m. - 5:00 p.m.
30 Samuel Barnet Blvd., New Bedford, MA 02745 USA
 
Imtra Corporation | Privacy Statement | Terms Of Use